Blood Bank Equipment

MarkEn Blood Bag Tube Sealer is a heavy-duty blood bag tube sealer based on Radio Frequency (RF) dielectric which gives a unique sealing finish. It is a tabletop model.

In under three seconds, this next-generation tube sealer reliably creates high-quality seals that are easy to separate. Compact, lightweight, quiet, and durable, this device is suitable for single-unit or cascaded table-top use, bringing increased efficiency to blood collection and processing.

FEATURES:

•Designed for tabletop application.

•Anti-spark and overheat protection system to avoid damage to the system & tubing

•Visual indication:

    Ready to seal,

     Seal process

     Power supply

     Cover Open

•Easy to remove sealing head cap for quick cleaning Seal with clear break line for snap apart separation Splash guard for technician safety

•Sealer works on radio frequency to seal tube without causing hemolysis.

•Automatic detection and triggering of the tube sealing by the optical sensor.

•Designed for a minimum of 10 years of life with the assurance of spare Parts availability.

•Minimum sealing time (1-3 sec) No warm-up time for the equipment before sealing has separable rupture line to separate tube ends after sealing making wide seals of 2.6mm ensure easy separation of tube segments after the sealing Switch mode power supply for uniform sealing irrespective of power supply variations.

•Compatible with the tubes of various manufacturers of blood bag seals 1.0 to 6 mm tubes with a wall thickness of 0.75 mm

•Electrical Safety Standards IEC 60335-1 and IEC 60335-2-24, IEC 61010-1, IEC61010-2-020 and 61010-2-101, IEC61326-1, IEC61326-2-6, IEC (Class I)

MarkEn Blood Bank Refrigerators with a highly efficient compressor that provides superior temperature recovery, rapid cooling and quiet performance for each model. 

FEATURES :

1. First in class Blood Bank Refrigerator which can maintain a Temperature range of +2°C to +8°C at

2. Designed for tropical climates.

3. The Hot Line at the mouth of the cabinet for Anti Condensation

4. Compression Cycled type. Refrigeration and insulation are CFC-free.

5. The door is fitted with standard size heavy duty hinges with aspiring loaded automatic closing device ensuring positive closure for less than 90° opening of the door.

6. Designed for minimum 10 years life with assurance of spare parts availability.

7. Quality Management: ISO 9001:2015, ISO 13485:2015

8. Electrical Safety Standards: IEC 60335-1 and IEC 60335- 2-24, IEC 61010-1, IEC 61010-2 020 and 61010-2-101, IEC 61326-1, IEC 61326-2-6.

TECHICAL SPECICATIONS:

MarkEn a Blood Collection Monitor is a device used to monitor the collection of a blood donation to protect against over or under bleeding of the patient. The devices are extensively used in hospitals, research clinics, and pharmaceuticals industries to ensure the anticoagulation and addition of blood when necessary, without blood cells being damaged during the collection procedure.

FEATURES:

1. The display shows the final volume collected and the donation time in minutes & seconds at end of each donation.

2. All collection data can be recalled and read from the memory.

3. Auto tare of the empty bag.

4. Adjustable upper safety limit for collected volume.

5. Adjustable Low and High Flow alarms.

6. Detection system on clamp for checking tube positioning.

7. Safety switch to control if tubing is well inserted into the clamp.

8. Calibrate within few seconds with a known calibration mass.

9. Possibility to connect to network through PC & software with the facility of Data Recording which includes sample values of volume/flow.

10. Context sensitive frames for step-by-step guide.

11. Transport case with battery charging facility and Calibration mass 500 gm.

12. Collected volume range adjustable with 1 ml step.

13. Setting of two default volumes.

14. Adjustable maximum donation time up to 20min.

15. Configurable date and time.

16. Up to 1000 donations can be stored in internal memory.

17. Service programs available for common trouble shootings.

18. RS 232 port for connecting external equipment like Bar Code reader etc.

MarkEn Blood Donor Couch is designed to provide a comfortable position for the donor. The donor position can be easily shifted from an upright body position. All surfaces of the coach are smooth, easily accessible, and can be kept clean. Electrical and mechanical accessories are housed inside the structure making the product safer. The advantage of a Blood Donor station by providing a one-piece lying surface with more flexibility in its functions. Besides your patient’s requirements for a comfortable sitting position – it also provides a very relaxing lying position.

SALIENT FEATURES

1. Based on the Hemodynamic principle

2. Tilt and height adjustment can be done by using the remote control

3. Ensuring the safety and comfort of the donor

4. Castor wheel with locking

5. Glass holder

6. Facility for blood collection monitor

7. All Metal Frame Construction

8. Motorized Movements

9. Towel Holder

10. Accommodate assembly for operator ease and solid arm support

11. Adjustable armrest swing out for easy seating

12. Carrying capacity of more than 200 kg

13. Premium, UL-listed polyurethane foam

14. Attached stand for blood collection

15. Motor for elevation and movement

16. Pre-treated and epoxy powder-coated finishing

17. Warranty 3 Years

Designed for a minimum of 10 years of life with the assurance of spare parts availability.

Quality Management: ISO 9001:2015, ISO 13485:2015

Electrical Safety Standards IEC 60335-1 and IEC 60335-2-24, IEC 61010-1, IEC 61010-2-020 and 61010-2-101, IEC 61326-1, IEC 61326-2-6.